-
Handheld Linear Imager Scanner
-
Datalogic ‘Green Spot’ for good read feedback
-
User replaceable scan window
-
Two multi-interface options support the most popular interface combinations
-
Supports GS1 DataBar™ codes
-
Remote host download functions (Model QD2110)
-
Water and Particulate Sealing Rating: IP42
-
Drop resistance to 1.5 m
?
|
Hands free Stand |
DLQD20STAND-B |
Standard Hands free Stand for QuickScan I & L, Black |
|
Window pack |
DLQS233WIN |
Replacement windows (pack 5) |
|
Adaptor |
AD-DL5VR |
5V Regulated Power Supply? |
|
Sensor |
CCD Solid State (3648 Pixels) |
|
Light source |
Red LED 610-650nm |
|
Depth of field |
1.5 to 15 cm on 5 mils barcode 0.8 to 38 cm on 10 mils barcode 2.5 to 65 cm on 20 mils barcode |
|
Scan rate |
270 Reads/sec |
|
Resolution |
Max. 0.102mm/4 mils |
|
Print Contrast |
15% or higher |
|
Pitch Angle |
65º |
|
Roll (Tilt) Angle |
35º |
|
Skew (Yaw) Angle |
65º |
|
Reading Indicators |
Datalogic ‘Green spot’ good read, adjustable tone beeper, Good read LED |
|
Interface |
USB, RS232, Wedge & Wand Multi Interface (QD2130) RS232, IBM 46XX, USB Multi Interface (QD2110) |
|
Symbologies supported |
Linear codes: Auto-discriminates all standard 1D codes including GS1 DataBar™ linear codes Stacked Codes: GS1 DataBar Expanded Stacked, GS1 DataBar Stacked and GS1 DataBarStacked Omni-directional |
|
Programming method |
Manual: Reading special bar codes Automatic: (with RS-232) S/W commands through the serial port ALADDIN™: Windows configuration program |
|
Input voltage |
QD2130 5 VDC +/-10% QD2110 4.0-14.0 VDC |
|
Input Current |
Operating typical 340mA @ 5V Standby/Idle Typical 190 mA @ 5V |
|
ESD Protection |
20 kV (Air Discharge) |
|
Drop Resistance |
Withstands repeated drops from 1.5m onto concrete |
|
Warranty |
5 Year limited Factory Warranty (not on cable) |
|
Dimensions (H x W x L) |
170 x 71 x 66 mm |
|
Weight |
121.9g |
