The NV-202 is a single port VDSL2 bridge equipped with two 10/100Mbps Ethernet ports. Compliant with the ITU-T G.993.2 VDSL2 standard, the NV-202 supports a maximum bandwidth of up to 100Mbps symmetric in VDSL2 Profile (30a) solution. The NV-202 also supports both central office (CO) and customer-premises equipment (CPE) modes selectable through DIP Switches.
Key Features & Benefits
- Supports RJ-11/Terminal Block combo for Line port.
- Supports high bandwidth up to 100Mbps symmetric over Line ports
- Support long reach mode up to 3 km with 24 gauge phone wire
- Support auto speed for Line port and Interleave mode selectable through CO side DIP switch
- DIP switch with CO and CPE mode selectable
- Supports long packet size up to 1536 bytes
- Supports Surge protection
- Supports wall mounting
- Mini size and metal case design
- Supports point-to-point applications
Product Specifications
Standard:
IEEE802.3 standard
IEEE802.3u standard
G993.2 VDSL2 standard
Physical Interface:
2 x RJ-45 10/100Mbps auto-negotiation Ethernet port
1 x RJ-11/Terminal Block connector for VDSL2 line port
1 x DIP Switch
1 x Power Jack
LED indication:
1 x Power LED
2 x Link/Active Status for Ethernet port
1 x Link LED for VDSL2 port
1 x CO Mode indicator LED
1 x CPE Mode indicator LED
Power Requirement:
Input Voltage: 12VDC / 1A
VDSL2 Line Code:
Discrete multitone (DMT) modulation
VDSL2 Transmission Mode:
Packet Transfer Mode (PTM)
Operating Temperature:
0oC~ 50oC (32oF ~ 122oF)
Storage Temperature:
-20°C ~ 65°C (-4°F ~ 149°F)
Humidity:
10 to 90% (non-condensing)
Dimensions:
95 x 110 x 27 mm (3.74″ x 4.33″ x 1.06″)
