LevelOne GEP-5070

Customised Solution, Support and Installation

Free worldwide shipping on all orders over $50

  • 30 days easy returns
  • Order yours before 2.30pm for same day dispatch
Guaranteed Safe Checkout

An ideal network solution for workgroups and edge deployments, or anyone looking for an affordable and efficient way to expand their network.

The LevelOne GEP-5070 is an intelligent L2 Managed Switch with 48 x 1000Base-T PoE-Plus ports and 2 x 100/1000BASE-X SFP (Small Form Factor Pluggable) slots. This switch is IEEE 802.3af/at compliant, providing power and data over a single Ethernet cable to any PoE device, with total power budget of 375W (up to 30W per port) 

This switch provides a flexible, web-based management interface, SNMP for both IPv4 and IPv6 as well as comprehensive layer 2 management features. Despite its affordable pricing, the GEP-5070 is equipped with many advanced features such as Internet Group Management Protocol (IGMP) snooping V1/V2/V3 forwarding, VLANs, IEEE 802.1D/w Spanning Tree, Access Control List (ACL) of up to 512 entries for easy network security, Link Aggregation Control (LACP), IEEE 802.1p QoS with 8 priority queues, UPnP for auto- discovery and configuration of devices, Storm Control for protecting against broadcast/multicast/unknown unicast and much more.

 

Key Features

  • 48 PoE-Plus Gigabit Ethernet ports and 2 Gigabit SFP slots
  • IEEE 802.3af/at PoE compliant to simplify deployment and installation
  • IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) and port mirroring
  • IEEE 802.3ad LACP for auto port aggregation
  • Supports Access Control List (ACL) authentication of up to 512 entries and port-level security with IEEE802.1X
  • IP Multicast Filtering through IGMP Snooping V1 / V2 / V3
  • Supports port-based VLAN, IEEE 802.1Q VLAN Tagging
  • 10K jumbo frames to increase data transfer rates
  • Supports IPv4/IPv6 network operation
  • IEEE 802.1p QoS with 8 priority queues
  • Supports Universal Plug and Play (UPnP) for auto-configure network devices
  • NTP time synchronization service
  • Total PoE power budget: 375W, up to 30W per port

Highlights

Cost Effectiveness and Enhanced Flexibility

Featuring Power over Ethernet Plus (PoE+) technology (IEEE 802.3at), which nearly doubles the power delivery comparing to the IEEE 802.3af PoE technology. Furthermore, it ensures that the power is used more efficiently due to the maximum power will only be requested when it is needed. Thus providing great cost savings by reducing power bills and eliminating the need for additional power cables and outlets.

Cost-effective Solutions for IPv6 Deployment

Featuring the most comprehensive set of IPv6 migration technologies, including stateless auto configuration which simplifies IP address assignment by creating a plug-and-play environment in the absence of a DHCP server and the implementation of dual IP stack that allows not only for running both IPv4 and IPv6 applications in parallel but also for facilitating gradual transition between these applications.

Specifications

Buffer Memory (KB): 512KB

Connectors and Cabling:

48 x 10/100/1000Base-T RJ-45 PoE-Plus Ports

2 x 100/1000Base-X SFP Slots Button:

LED Mode Button

Indicators:

Power; Link/Active; PoE

Transmission Method: Store-and-Forward

Power:

Max Power Consumption: 500W

Power Input: 100-240V AC, 50-60 Hz, Internal Power Supply

Standards & Protocols:

IEEE 802.3 10-BASE-T, Ethernet

IEEE 802.3u 100-BASE-TX, Fast Ethernet IEEE 802.3ab 1000BASE-T, Gigabit Ethernet IEEE 802.1p Quality of Service (QoS)

IEEE 802.1Q Virtual LANs (VLANs) IEEE 802.1D MAC Bridges

IEEE 802.1d Standard Spanning Tree Protocol (STP) IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) IEEE 802.1s Multiple Spanning Tree (MSTP)

IEEE 802.1X Port-based Network Access Control (PNAC)

IEEE 802.3x Flow Control (full-duplex flow control)

IEEE 802.3ad Link Aggregation Control Protocol (LACP) IEEE 802.3af Power over Ethernet (PoE)

IEEE 802.3at Power over Ethernet  Plus (PoE+) Universal Plug and Play (UPnP)

Physical

Dimensions (W x D x H mm): 440 x 350 x 44.5 mm

Weight (g):

6140g with box, 5190g without box

Backplane (Gbps): 100Gbps

MAC Address Table: 32K

Data Transfer Rate: 10/100/1000Mbps

Packet Forwarding Rate: 1000Mbps port – 1,488,100pps 100Mbps port – 148,810pps 10Mbps port – 14,881pps

Jumbo Frame (K): 10K

Management Features

Quality of Service (QoS):

8 hardware Priority Queues per port

Traffic classification based on IEEE 802.1p CoS, DSCP, Supports WRR, Strict scheduling, or hybrid mode Rate Limiting – Ingress resolution 16 Kbps; Egress resolution 16 Kbps

Spanning Tree:

IEEE 802.1D MAC Bridges

IEEE 802.1d Spanning Tree Protocol (STP)

IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) STP Auto Edge

Virtual Local Area Network (VLAN):

802.1Q tag-based VLAN – up to 4096 VLAN IDs; Port-based VLAN; Voice VLAN; Private VLAN

IPv6:

IPv4/IPv6 Dual Protocol stack; IPv6 Address Types Stack (Unicast); ICMPv6; ICMPv6 Redirect (Host); Stateless Auto Configuration; IPv6 Neighbor Discovery; SNMP over IPv6; HTTP over IPv6; DHCPv6 Client; Remote IPv6 Ping; NTPv6

DHCP: DHCP Client; DHCP Relay (Layer 2)

IGMP snooping: v1/v2/v3 forwarding; immediate leave Port Mirroring: Many-to-One TX/RX

Port Trunking: IEEE 802.3ad LACP Trunk -Static Trunk up to 25 trunk groups PoE:

Power Budget: Max. 375W

Power Output: Up to 30W per port

Protection: Circuit protection to prevent power interference between ports Management: PoE status, Per port power priority setting, PD classification identity Pin Assignment: 1/2(+), 3/6(-)

Security: Storm Control:

Prevents traffic on a LAN from being disrupted by a broadcast, multicast, or unicast storm on a port

Access Control:

SSH v1/v2 supported; HTTPS/SSL; IEEE 802.1X Radius/Tacacs+ authentication; Dynamic VLAN assignment

ACLs: Support for up to 512 entries Filtering: Port-/MAC-/IP-based security

Management: Diagnosis:

Event / Error Log / Syslog

Network:

sFlow; RMON (groups 1, 2, 3 and 9) Management; SNMP v1, v2, v3 User-based Security Model (USM); DNS client, proxy; HTTP Server; HTTPs; SSHv2; LLDP

Ease of Use:

Firmware and Configuration: Upgrade via TFTP/HTTP

Environmental

Temperature (°C): Operating: 0°C ~ 50°C Storage: -40°C ~ 70°C

Humidity (Non-condensing): Storage: 10% ~ 90%

Operating: 10 ~ 90%

 

Approval and Compliance: FCC Part 15 Class A, CE

Deployment:

19-inch rack-mountable

 

Package Contents 

Resource CD (User Manual) Power Cord

19″ Rackmount Kit

Quick Installation Guide Module Brackets