The NV-202P is a Long-Reach Ethernet Extender with PoE. It is equipped with two 10/100Mbps Ethernet ports that have built-in Power over Ethernet. It delivers data and electrical power to Ethernet devices using standard Category 5/6 Ethernet cable.
This provides an economical solution for commercial-grade applications. Operators in various enterprise sizes will now be able to deploy PoE devices in any service location, install network security cameras, wireless access point security / VOIP, or access control systems in any place where you have basic wire connectivity. The NV-202P also supports both central office (CO) and customer-premises equipment (CPE) modes – selectable through a DIP Switch.
Compliant with ITU-T G.993.2 VDSL2 standard, the NV-202P supports a maximum bandwidth of up to 100Mbps symmetric in a VDSL2 solution. As VDSL2 has the characteristic of higher bandwidth over shorter distances, it is the ideal architecture for Telcoms to use fiber optic lines as the backbone and a VDSL2 line as the last mile into the home or office. With outstanding throughput, the NV-202P can complement a fiber network to offer the best solution for delivering Triple play (Video/Voice/Data) or home entertainment services.
Key Features & Benefits
• Provides 2 x 10/100 Mbps RJ-45 Ethernet ports with power injector
• Supports RJ-11/Terminal Block combo for Line port.
• Supports high bandwidth up to 100Mbps symmetric over Line ports
• Support long reach mode up to 3 km with 24 gauge phone wire
• DIP switch with CO and CPE mode selectable
• Support auto speed for Line port and Interleave mode selectable through CO side DIP switch
• Supports long packet size up to 1536 bytes
• Supports Surge protection for line port
• Auto-detect of PoE IEEE 802.3af/at (up to 30W) equipment providing protection from incorrect installation
• Supports mid-span PoE mode
• Supports wall mounting and DIN-Rail mount installation (Optional)
• Supports point-to-point applications
Product Specifications Standard: Compliant IEEE 802.3 standards
Compliant IEEE 802.3u standard
Compliant IEEE 802.3af / IEEE 802.3at standard
Compliant ITU-T G993.2 VDSL2 standard
Physical Interface: 2 x RJ-45 10/100Mbps auto-negotiation Ethernet port with power injector
1 x RJ-11/Terminal Block connector for VDSL2 line port
1 x DIP Switch
1 x Power Jack
Power & PoE: Input Voltage: 36 ~ 57 V DC (Typical: 48V) (Commercial-grade desktop Power Adapter)
Output: 30W max for each. (Pin Assignment:4/5(+),7/8(-))
LED indication: 1 x Power LED
2 x Link/Active Status for Ethernet port
2 x PoE Indicator LED
1 x Link LED for VDSL2 port
1 x CO Mode indicator LED
1 x CPE Mode indicator LED
VDSL2 Line Code: Discrete multitone (DMT) modulation
VDSL2 Transmission Mode: Packet Transfer Mode (PTM)
Operating Temperature: 0°C~ 50°C (32°F ~ 122°F) Fanless, free air cooling
Storage Temperature: -20°C ~ 70°C (-4°F ~ 158°F)
Humidity: 10 to 90% (non-condensing)
EMC: EMI Compliant: FCC Class B
EMS Compliant: CE mark Class B
Dimensions: 137 x 100 x 27 mm (5.39″ x 3.94″ x 1.06″)
