The NV-802S is a VDSL2 IP DSLAM that aggregates 8 ports into Gigabit Ethernet uplinks for high-speed data/Internet services.
Based on DMT VDSL2 technologies, the NV-802S extends data services such as remote lecturing, telemedicine, video conferencing, Video-on-Demand (VoD), IP-TV, Internet access and other high-speed data applications.
When the number of subscribers increases, the second uplink Giga Ethernet interface can be used to daisy chain to another NV-802S. Alternatively, multiple NV-802S units can be connected to a backbone LAN switch to form a two-tier configuration, thus supporting a lot more subscribers.
The NV-802S is an ideal solution for delivering cost-effective, high-performance broadband/multimedia services to Multi-Tenant Units (MTUs) or Multi-Dwelling Units (MDUs) such as hotels, campus, and hospitals.
Features & Benefits
- Supports 997, 998 band plans.
- Supports Jumbo packet up to 9k byte
- Supports interleave delay for noise resistant
- Supports 8a, 8b, 8c, 8d, 12a, 12b, 17a, 30a band profiles
- Supports high bandwidth up to 100 Mbps within 0.3km (984 feet) for VDSL2 ports
- Supports bandwidth management(rate control) from 100k to 100Mbps
- Supports IEEE 802.1q tagging VLAN with Q-in-Q
- Supports quality of phone wiring detected with SNR(Signal to Noise Ratio) indications
- Supports COS IEEE-802.1p with 4 priority queues
- Supports HTTPS(SSL) web management.
- Supports Multicast IP table/IGMP v2 with 512 groups
- Supports LACP IEEE-802.3ad Port Trunking(Link aggregation)
- Supports IEEE 802.1d STP / IEEE 802.1w RSTP & IEEE-802.1s MSTP
- Supports port Mirroring (Sniffer) and Broadcast Storm filtering
- Supports port security with MAC address filtering
- Supports Remote Syslog
- Supports Traffic storm control
- Supports Web Base and Telnet for remote management
- Supports SNMP v1/v2/v3 RFC-1493 Bridge MIBs, RFC-1643 Ethernet MIB, RFC-1213 MIBII
- Supports RMON groups 1(Statistics), 2(Alarm), 3(Event), 9(History)
- Supports HTTP/TFTP for firmware upgrade
- Supports In-Band/Out-of-Band Management
- Chipset: Lantiq VINAX
Specifications
- Standards:
- IEEE802.3 standard
- IEEE802.3u standard
- IEEE802.3ab standard
- IEEE802.3z standard
- ITU-T G993.2 standard
- ITU-T G994.1 standard
- Interfaces:
- 2 x RJ-45 10/100/1000Mbps Ethernet ports
- 2 x 1000Mbps SFP slot ports
- 8 x RJ-45 connector for VDSL2 connection
- 8 x RJ-45 connector for POTS/ISDN connection
- 1 x console port
- Flow Control:
- Full duplex: IEEE 802.3x
- Half duplex: Back pressure
- MAC Address Table:
- 8K Entries
- LED Indicators:
- 1 x Power LED
- 1 x POST LED
- 8 x Link/Active/Speed/Duplex/Collision Status for Ethernet port
- 8 x VDSL2 Link LED
- VDSL2 Spectrum:
- 138kHz ~ 30MHz
- POTS/ISDN Pass Filter Spectrum:
- 0 ~ 120kHz
- Operating Temperature:
- 0°C ~ 50°C (32°F ~ 122°F)
- Storage Temperature:
- -20°C ~ 70°C (-4°F ~ 158°F)
- Humidity:
- 10 to 90% (non-condensing)
- Dimensions:
- 435mm x 255mm x 44mm (17.13″ x 10.04″ x 1.73″)
